EU certification included
The Ecomotive M1N1 adapter carries European approval e19-0026-00 and meets relevant requirements for tachograph installations.
EU approved and certified: e19-0026-00
M1N1 adapter for tachograph retrofits from 1 July 2026
Direct answer: The Ecomotive M1N1 adapter is an EU-approved retrofit solution for authorised tachograph workshops that need to equip M1 and N1 vehicles with intelligent tachographs from 1 July 2026.
The EU-certified retrofit solution for tachograph workshops that need to equip M1 and N1 vehicles quickly, compliantly and at scale.
- Author
- Digitalflotte editorial team
- Published
- Published on 9 June 2026
- Updated
- Updated on 9 June 2026
- EU approved for professional tachograph installations
- Developed specifically for M1 and N1 vehicle classes
- Pre-configuration with the Ecomotive configurator
- For authorised tachograph workshops only
from 1 July 2026
Deadline relevant to many light commercial vehicles in cross-border goods transport
e19-0026-00
EU type approval for the Ecomotive M1N1 adapter
M1 + N1
Vehicle classes supported for professional retrofitting
01
Why workshops choose the M1N1 adapter
The adapter is built for workshop processes where speed, traceability and compliant installation matter.
Fast configuration
With the Ecomotive configurator, the adapter can be parameterised before installation to reduce fitting and commissioning time.
Built for the 2026 retrofit wave
The new tachograph obligation creates strong demand across Europe. Workshops need a reliable and repeatable solution.
02
More than just an adapter
The M1N1 adapter can be part of a complete retrofit solution for light commercial vehicles.
M1N1 adapter
Certified interface between vehicle and tachograph.
Lesikar M172 sensor
Precise signal acquisition where a conventional motion sensor cannot be installed in the standard mechanical position.
Ecomotive configurator
Parameterisation and pre-configuration of the adapter for efficient workshop workflows.
Contactless CAN reader
Read CAN data without interfering with existing vehicle wiring. Ideal for modern vehicle platforms.
03
Go directly to the webshop
M1N1 Adapter Ecomotive incl. Lesikar M172 Sensor
Adapter unit with motion sensor, cable set, yellow B connector, mounting kit, installation label and Quick Information Card.
Webshop
Configurator for M1N1 Adapter Ecomotive
For selecting the relevant CAN program and pre-configuring the adapter efficiently.
Webshop
CAN Reader contactless - CAN Lopo
Contactless CAN bus reading without modifying existing vehicle wiring.
Webshop04
Typical vehicles affected by smart tachograph retrofit requirements
These vehicles are frequently used in commercial goods transport and may be affected by tachograph or retrofit obligations depending on weight, use case and legal requirements.
Mercedes-Benz Sprinter
Volkswagen Crafter
MAN TGE
Ford Transit
Iveco Daily
Renault Master
Opel Movano
Nissan Interstar
Fiat Ducato
Peugeot Boxer
Citroën Jumper
Note: Whether your vehicle is subject to a tachograph or retrofit requirement depends on applicable EU regulations, the permissible gross vehicle weight and the specific use case. We are happy to review your individual case.
05
More vehicles. Less workshop time.
✓Pre-configuration before the workshop appointment
✓Shorter downtime and more vehicles per working day
✓Standardised configuration with fewer error sources
✓High compatibility for many M1 and N1 vehicles
✓Compatible with VDO Continental and Stoneridge tachographs
✓Future-ready solution for 2026 tachograph retrofits
For certified specialist workshops only
The installation of an intelligent tachograph and its related components may only be performed by qualified and authorised specialist businesses. Digitalflotte supports workshop partners with technical advice, training materials, installation guides and configuration support.
FAQ
Questions & Answers
Which vehicles is the M1N1 adapter intended for?
It is intended for M1 and N1 vehicles where a conventional motion sensor cannot be installed in the standard mechanical position.
Is the M1N1 adapter EU approved?
Yes. The EU approval number is e19-0026-00.
When is the configurator required?
If the base signal is connected via CAN rather than IMP pulse, the configurator is required to set the matching CAN program.
Is the contactless CAN reader included?
No. The CAN Lopo reader is optional and can be ordered separately.
The 2026 retrofit wave starts now
Prepare your workshop early for the rising demand for M1N1 retrofits.
The Ecomotive M1N1 Adapter is compatible with digital and smart tachographs from VDO and Stoneridge, making it an ideal solution for retrofitting vehicles in the M1 and N1 categories.
Contact
Get information about:
- M1N1 adapter and configurator
- Workshop terms and conditions
- Technical specifications
- Installation, configuration, and support
- Availability and delivery times